RECOMMENDED CLEANING & DISINFECTION AGENTS
Website – Cleaning (refer to SUD03-VAL-CLN_01 Qualification Report Cleaning Product)
As the manufacturer, we have evaluated and recommended the following cleaning and disinfection agents to support the proper maintenance of your SUDOSCAN smart electrodes.
Important : Always refer to the official SUDOSCAN User Guide or Installation Guide for the detailed, step-by-step cleaning and disinfection protocols.
Technical Requirements
We recommend selecting cleaning and disinfection solutions that meet the following technical requirements, based on our internal material compatibility evaluations:
- pH Level: Ideally balanced between 5.0 and 8.0.
- Chlorides: Low or zero chloride content to strictly prevent long-term surface corrosion of the stainless steel.
- Formulation: Alcohol-free to protect the structural integrity of the material.
- Safety: Formulated for good skin tolerance.
Manufacturer Note: Use only approved low-detergent products intended for non-invasive medical devices. The safety data sheets (SDS) and instructions for use provided by the chemical manufacturers must always be observed, including the mandatory use of appropriate equipment, such as gloves and masks, as specified by the solution provider.
Examples of Compatible Products (For Reference Only)
The market products listed below meet our internal criteria and were found functionally compatible with the SUDOSCAN:

Website – Cleaning (refer to SUD03-VAL-CLN_01 Qualification Report Cleaning Product)

* Please note that this list is provided for illustrative purposes only. Product formulations may change over time, and local availability may vary.
For anyinformation, please contact the correspondent manufacturer directly.
Contact & Vigilance
- To report a suspected serious incident or for any safety and medical vigilance inquiries regarding our devices, please contact our Quality & Regulatory Affairs department directly at: vigilance-impeto@withings.com
- General Inquiries: For any other questions, please contact us at: contact@impeto-medical.com
SUDOSCAN is a Class IIa medical device manufactured by Impeto Medical, indicated for the early identification and follow-up of peripheral autonomic neuropathies, and to identify people at increased risk of diabetes (pre-diabetes included). For professional use only. Please read the instructions before use. This medical device is a regulated health product which bears, under this regulation, the CE marking (1639)
Last update : 2026/06/15




